Zar Mini RIB 9 DL Hypalon

Zar Formenti RIB 9 DL Hypalon

Our ZAR mini™ RIB line has two versions. RIB LITE and RIB DL with double floor and bow locker. RIB 8 and RIB 9 fit a 12l fuel tank. RIB10-12 fit a 24l fuel tank in the bow locker. RIB LITE are weight optimized without bow locker or flat double flooring.

The ZAR mini™ RIB line can easily pull water toys and tubes with the two installed D-rings on the transom.

Every ZAR mini™ has 3 lifting Davit lifting points. One in the bow and two at the transom. If your ZAR mini™ has a bow locker (DL version), you will have four lifting points.

Due to the very light aluminum hull it can go very fast and plan easily with a smaller engine. The hull will not face any problems like a fiberglass hull. It will also last longer and not become heavier during use. The hull are made of special aluminium and powder coated to resist corrosion and saltwater. You will have a lot of fun with your ZAR mini™ RIB.

All ZAR mini™ RIB inflatables are also available in CSM (formally known as HypalonTM from DuPontTM) with a special design. Please ask your ZAR mini™ dealer, for further details. CSM lasts much longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. We use HypatexTM that is one on the best material on the world market today. It has been manufactured since 60 years.

All PVC seems of our ZAR mini™ tube chambers are welded. All boats feature an overpressure valve, as standard equipment, that will protect your tube when inflated properly. High quality material’s paired with constant research & development are the key to success.

Every single ZAR mini™ inflatable boat passes a very strict quality control, before we deliver it to our valued customers. Just in case a mistake passes the quality control, you will be protected by our limited warranty after registering your boat with us.

Features may include:

• Medium-V bottom

• Ultralight V floor

• Reinforced integral transom for outboard engine

• 5 reinforced towing bow eyes

• Splash guard on transom

• Self drainage plug

• Multi-chamber buoyancy tube

• Tough raised rubbing strake with splash guard

• adjustable & removable ALU seat(s)

• 2 Bow lifting handle

• 2 Rear lifting handles

• Holding handles on tube

• Saftey valve

• Antislip pattern inside

• Bi color tube with deco

• Keelguard

• 2 oarlocks with 2 oars and oar posts

• High efficiency foot pump

• Maintenance kit & User's manual

• 2 holders for fuel hose on tube

• Welded PVC tube material*

• Extra Powdercoated aluminium hull - 200°C