Anchor roller with stainless steel plate ready for electric windlass
2 wide bow storage compartments
2 aft side small compartments
Wide aft central storage locker
2 spacious aft storage compartments
Fuel tank about 600 l / 160 gal CE standard installed
Navigation lights fully installed (bow lights and anchor light on pole)
Electrical switch/fuse panel on console
2 seater helm console with hydraulic steering system and sports steering wheel as well as 2 glove compartments
Two separate rooms: 1) marine toilet with waste tank, wash basin, shower as well as an integrated system of lockers 2) double bedroom and an integrated system of lockers
Electric toilet with waste tank
2 LED lights inside the bedroom and 2 LED inside the toilet room
Dual adjustable helm/navigator seat with pivoting leaning squabs
Galley with 2 or 3 burners (gas installation not included)
Complete set of external cushions
Fitted backrest cushions in the bow seating area
Fitted backrest cushions in the aft seating area
Cabin cushions
Pressurized freshwater system with integral water tank (about 140 L/37 gal) and shower
Stainless steel refrigerator (64 l)
Gas actuator for the bow locker lid
Gas actuators for the 3 aft locker lid
Retractable bimini concealed within aft cockpit equipped with actuators for automatic opening
Bilge pump
14 kg/30 lbs stainless steel anchor
Double heavy rubber bumper
Stainless steel handrails for all occupants
4 stainless steel cleats
3 stainless steel eyebolts for hangers
Left stern deck stainless steel folding ladder
Right stern deck Repair kit, inflating pump, pair of paddles
Photos
Highlights
Richmond, British Columbia
2023
Zar Formenti
95 SL Base
Engine shaft length 2 x XL – 1 x XXL
11’ (3.30 m)
Available
Internal walking: 8’ 2” (2.50 m) | Intertubular: 6’ 9” (2.05 m )
Specifications
2023
Zar Formenti
95 SL
Base
Inflatable
Tubular diameter: 2’ (60 cm)
31’ 6“ (9.60 m) | Internal walking: 31’ 6“ (9.60 m )
11’ (3.30 m)
Internal walking: 8’ 2” (2.50 m) | Intertubular: 6’ 9” (2.05 m )
14-16 Persons
Net boat (with standard equipment, without liquids and motor) ± 10% approx: 5512 lbs (2500 kg) | Max. installable motors: 1610 lbs (730 kg)
Engine shaft length 2 x XL – 1 x XXL
Maximum applicable: 700 HP (522 kw ) | Minimum applicable: 350 HP (261 kW) | Recommended (average performance): 500 HP (373 kW)